Table of Contents
Advertisement
Step 25: Attach Soffits
A: On the top of the Front Wall place 1 (9350) Soffit so that it's centered over (9365) TB Support and flush to the
inside edge, making sure to follow the hole orientation closely. Using the inside set of holes, attach (9350) Soffit
with 6 (S20) #8 x 1- 3/8" Wood Screws. (fig 25.1 and fig 25.2)
B: Repeat Step A to install (9350) Soffit on the Back Wall Panel. (fig 25.1)
C: Place 1 (9351) Soffit Narrow across the end of each opening so they are flush and tight to the (9351) Soffits.
Attach (9351) Soffit Narrow on the SW Wall Panel side using 4 (S20) #8 x 1- 3/8" Wood Screws and on the
opposite side using 2 (S20) #8 x 1- 3/8" Wood Screws taking care to ensure that the correct pre-drilled holes are
being used . (fig 25.1 and fig 25.2)
Fig. 25.1
x 2
S20
9350
Wood Parts
2 x
Soffit 5/8 x 4-27/64 x 40-5/32"
9350
2 x
Soffit Narrow 15.9 x 1-19/32 x 43-11/32"
9351
x 6
9351
S20
per side
9365
18 x
Fig. 25.2
9350
9351
S20
S20
SW Wall
Panel
Hardware
#8 x 1-3/8" Wood Screw
S20
65
Flush
Advertisement
Table of Contents
