Table of Contents
Advertisement
Step 11: Attach Rockwall
Part 1
A: In the front lower opening of the (9248) Narrow Panel center 1 (9386) Window Bottom Spacer ensuring that there
is a measurement of 22- 7/16" (570mm) between the board and the frame at both the top and bottom . Attach (9386)
Window Bottom Spacer to each side of the (9248) Narrow Panel using 2 (S4) #8 x 3" Wood Screws, making sure to
install on an angle as shown in fig. 11.2.
B: From outside of the assembly position 4 (9381) Vertical Rock Boards, making sure to flip every second board so
the holes are staggered . Check to ensure that the center holes in the Rock Boards are aligned with (9386) Window
Bottom Spacer then attach each board using 5 (S20) #8 x 1- 3/8" Wood Screws. (fig 11.1)
Fig. 11.1
9248
x 5 per
S20
board
9381
Wood Parts
4 x
Vertical Rock Board 5/8 x 4-1/2 x 51"
9381
1 x
Window Bottom Spacer 1 1/4 x 2 1/8 x 17
9386
S4
x 2
9386
Hardware
20 x
#8 x 1-3/8" Wood Screw
S20
2 x
#8 x 3" Wood Screw
S4
41
Fig. 11.2
22- 7/16"
57cm
22- 7/16"
57cm
opening is 22-7/16" (570mm)
Advertisement
Table of Contents
