KidKraft Cedar Summit DEVONSHIRE ELITE Installation And Operating Instructions Manual page 25

Step 3: Back Wall Assembly
Part 2
E: Bring the top and bottom of the frame assemblies together as shown in fig. 3.3. Place 1 (9353) Cross Support
Top across the assemblies where they meet . Attach (9353) Cross Support Top to (9371) Left Upright Back using
1 (WB1) 5/16 x 1" Wafer Bolt (with flat washer and t-nut) and install a second (WB1) 5/16 x 1" Wafer Bolt (with flat
washer and t-nut) to attach (9360) Back Post Left to (9371) Left Upright Back .
(fig. 3.3)
F: Make sure that the assembly is square and then install 18 (S30) #8 x 1- 1/16" Wood Screws in the locations
shown in fig. 3.4.
G: Tighten all bolts .
Fig. 3.3
Fig. 3.4
Wood Parts
1 x Cross Support -Top 1-1/4 x 3 x 42-15/16"
9353
x 18
S30
Hardware
18 x #8 x 1-1/16" Wood Screw
S30
2 x 5/16 x 1" Wafer Bolt
WB1
(FW2, TN2)
25
TN2
9353
FW2
x 2
WB1
9360
9371