Step 8: Floor Assembly
Part 1
A: Place 1 (9359) Floor Board tight to (9213) SW Wall Panel and attach to the (9382) Side Joists with 4 (S20) #8 x
1-3/8" Wood Screws. (fig. 8.1)
B: Have a helper hold (9356) Center Floor Joist tight to the bottom of (9359) Floor Board and centered over the pilot
holes in the (9213) SW Wall Panel. Attach from outside of the assembly using 2 (S4) #8 x 3" Wood Screws. (fig. 8.1)
C: Place (9462) Center Floor Support across the opposite end of (9357) Center Floor Joist, making sure that both
boards are flush at the top. Attach (9462) Center Floor Support to (9357) Center Floor Joist with 2 (S4) #8 x 3"
Wood Screws. (fig 8.1 and 8.2)
D: Check to make sure joist assembly is level, then from underneath attach (9462) Center Floor Support to each
(9356) Side Floor Joist using 1 (S4) #8 x 3" Wood Screw per side. (fig 8.1 and 8.2)
E: Attach (9359) Floor Board to (9357) Center Floor Joist using 2 (S20) #8 x 1- 3/8" Wood Screws. (fig. 8.1)
Fig. 8.2
9462
S4
Wood Parts
1 x
Center Floor Joist 1-1/4 x 3 x 62-13/64"
9357
1 x
Floor Board 5/8 x 3-3/8 x 34-3/8"
9359
1 x
Center floor support 1-1/4 x 3 x 34-3/8"
9462
Fig. 8.1
9462
S4
Hardware
6 x
#8 x 3" Wood Screw
S4
6 x
#8 x 1-3/8" Wood Screw
S20
35
9382
9356
9357
9359
front wall hidden
for clarity
front wall hidden
for clarity
place floor board to set height
9213
S4
S20
x 6