KidKraft Cedar Summit DEVONSHIRE ELITE Installation And Operating Instructions Manual page 46

Step 14: Tower Roof Support Assembly
Part 2
B: Place (9459) Short Bottoms across the front and back of the tower assembly so they are flush to the tops of
(9460) Wall Supports and (9379) Soffits. Attach from the outside of (9379) Soffits using 4 (S11) #8 x 2" Wood
Screws per board. (fig 14.2)
C: On the front and back of the tower assembly install 2 (9380) Tower Roof Supports between the (9459) Short
Bottoms and the (9248) Narrow Panels so they are flush and tight to the (9460) Supports. Attach using 2 (S11) #8 x
2" Wood Screws per board. (fig 14.2)
Fig. 14.2
9379
Wood Parts
2 x Short Bottom 1-1/4 x 2 x 20-5/8"
9459
4 x Tower Roof Support 1-5/16 x 2-5/16 x 23-5/8"
9380
9460
Hardware
16 x #8 x 2" Wood Screw
S11
9459
46
9379
x 2 per
S11
side
x 2 per
S11
side
9380