KidKraft Cedar Summit DEVONSHIRE ELITE Installation And Operating Instructions Manual page 69

**other gables hidden for clarity**
Step 27: Attach Roof Panels
Begin with two gable assemblies and assemble
as shown
Part 2
note: this hole
D: Take a second roof panel and fit the connector tabs so they are coupled with the panel that was previously
not used
**other gables hidden for clarity**
**other gables hidden for clarity**
installed . Snap them into place and attach panels together using 3 (S20) #8 x 1-3/8" Wood Screws and then
attach panels to (2852) Roof End using 3 (S11) #8 x 2" Wood Screws. (fig. 27.5, 27.6, 27.7 and 27.8)
Begin with two gable assemblies and assemble
Begin with two gable assemblies and assemble
as shown
as shown
* Other gables hidden for clarity
**other gables hidden for clarity**
Begin with two gable assemblies and assemble as shown
note: this hole
Begin with two gable assemblies and assemble
not used
as shown
Fig. 27.5
A
A
A
A
B
Fig. 27.7
S11
B
B
B
note: this hole
not used
S20
note: this hole
not used
make sure Roof End
is flush to groove
on panel
Make sure Roof End is
flush to groove on panel
make sure Roof End
make sure Roof End
is flush to groove
is flush to groove
on panel
on panel
make sure Roof End
is flush to groove
on panel
2X #8 x 1-1/2" WS per roof
2X #8 x 1-1/2" WS per roof
2852
Hardware
3 x #8 x 2" Wood Screw
S11
3 x #8 x 1-3/8" Wood Screw
S20
69
2X #8 x 1-1/2" WS per roof
2X #8 x 1-1/2" WS per roof
Fig. 27.6
Fig. 27.8
3X #8 x 2" WS per roof
3X #8 x 2" WS per roof
3X #8 x 2" WS per roof
3X #8 x 2" WS per roof
S20
S11
Other Parts
1 x Roof Panel