KidKraft Cedar Summit DEVONSHIRE ELITE Installation And Operating Instructions Manual page 22

Step 2: Front Wall Assembly
Part 4
L: In the center notches of (9367) Narrow Mid Cross Front and (9451) Cross Support Middle Short place (9374)
Baluster making sure that the bolt hole is at the top. Attach using 4 (S30) #8 x 1-1/16" Wood Screws. (fig 2.9 and
2 .10)
M: Place 1 (9373) Baluster in each of the outside notches and attach using 4 (S30) #8 x 1- 1/16" Wood Screws
per board. (fig. 2.9)
N: Check to ensure that the assembly is square, then install 10 (S30) #8 x 1- 1/16" Wood Screws into the
locations shown in fig.2.9 securing the (9367) Narrow Mid Cross Front, (9451) Cross Support Middle Short and
the (9372) Cross Frame. (fig. 2.9 and 2.11)
O: Tighten all bolts .
Fig. 2.10
S30
9372
Fig. 2.11
Wood Parts
2 x Balluster 5/8 x 2-1/2 x 36-29/32"
9373
1 x Balluster 5/8 x 2-1/2 x 36-29/32"
9374
S30
9363
22 x
Fig. 2.9
9373
9451
Hardware
#8 x 1-1/16" Wood Screw
S30
22
S30 x 22
9367
9373
9374