Step 22: Attach Access Ladder/Rockwall
Part 3
C: Place (9269) Support Diagonal so that the angled end is flush to the front edge and to the bottom of (9239)
Left Rail . The opposite end should be tight against (9360) Back Post Left . Attach (9269) Support Diagonal to
(9239) Left Rail using 1 (H10) 1/4 x 2-1/4" Hex Bolt (with flat washer, lock washer and t-nut). (fig. 22.5)
D: Center 1 Corner Panel Bracket on each side of (9269) Support Diagonal so that each bracket is flat against
the brace and the wall panel as shown in (fig. 22.6). Attach each Corner Panel Bracket using 4 (S0) #8 x 7/8"
Truss Head Screws . (fig. 22.4 and 22.6)
Fig. 22.4
9213
9269
Wood Parts
1 x
Support Diagonal 15/16 x 3-1/4 x 23-11/16"
9269
Fig. 22.5
9360
Fig. 22.6
Hardware
8 x
#8 x 7/8" Truss Head Screw
S0
1 x
1/4 x 2-1/4" Hex Bolt
H10
(LW1, FW1, TN1)
62
Corner Panel Bracket
9372
9269
H10
LW1
9360
x 4
S0
per bracket
9269
9239
TN1
Flush
FW1
9372
Other Parts
2 x Corner Panel
Bracket