KidKraft Cedar Summit DEVONSHIRE ELITE Installation And Operating Instructions Manual page 76

Step 32: Attach Swing Assembly To Fort
A: Place (9352) SW Mount flush to the top of (9213) SW Wall Panel. Attach with 1 (G5) 5/16 x 4-1/2" Hex Bolt
(with lock washer, flat washer and t-nut) in the top hole from inside the assembly and 1 (G5) 5/16 x 4-1/2" Hex
Bolt (with lock washer, flat washer and previously installed t-nut ) in the bottom hole from inside the assembly.
(fig. 32.1 and 32.2)
Fig. 32.1
Flush
9213
9352
Hardware
1 x 5/16 x 4-1/2" Hex Bolt (LW2, FW2 and previously installed t-nut)
G5
1 x 5/16 x 4-1/2" Hex Bolt (LW2, FW2 and TN2)
G5
Flush
9352
TN2
Previously
installed T-Nut
76
G5
LW2
FW2
G5
LW2 (hidden)
FW2
Fig. 32.2