KidKraft Cedar Summit DEVONSHIRE ELITE Installation And Operating Instructions Manual page 21

Step 2: Front Wall Assembly
Part 3
H: Place 2 MOD 5 Pane Windows in the upper openings and attach to frame assembly using 7 (S0) #8 x 7/8"
Truss Head Screws per window . (fig. 2.5, 2.7 and 2.8)
I: Place (9377) Window Brace over the pre-drilled holes in (9353) Cross Support Top and (9369) Left Upright Front
to join the sections. Attach using 2 (H10) ¼ x 2- ¼" Hex Bolts (with lock washer, flat washer and t-nut). (fig. 2.5)
J: Loosely attach (9363) Base End Post to (9372) Cross Frame using 1 (WB1) 5/16 x 1" Wafer Bolt (with flat
washer and t-nut). (fig. 2.6)
K: Place 1 (9451) Cross Support Middle Short over the center hole in (9363) Base End Post and 1 (9367) Narrow
Mid Cross Front over the top hole. Loosely attach boards using 4 (WB1) 5/16 x 1" Wafer Bolts (with flat washer and
t-nut) in the locations shown in fig. 2 .6 .
Fig. 2.5
Fig. 2.7
S0
Fig. 2.6
Wood Parts
1 x Base End Post 1-1/4 x 2-1/4 x 86-29/32"
9363
1 x Narrow Mid Cross - Front 1-1/4 x 3 x 22-5/16"
9367
1 x Cross Support Middle Short 1-1/4 x 3 x 20-13/16"
9451
1 x Window Brace 1-1/4 x 3 x 8"
9377
S0
MOD 5 Pane
Window
9362
9361
9363
9372
14 x
4 x
2 x
x 7 per window
S0
9353
9451
Hardware
# 8 x 7/8 Truss Head Screw
S0
5/16 x 1" Wafer Bolt (FW2, TN2)
WB1
1/4 x 2-1/4" Hex Bolt (LW1, FW1, TN1)
H10
21
Fig. 2.8
TN1
9377
9369
FW1
LW1
x 2
H10
9367
TN2
FW2
x 4
WB1
Other Parts
2 x MOD 5 Pane Window
S0