Table of Contents
Advertisement
Step 16: Tower Roof Assembly
A: Line up the connector tabs on the 2 Roof Panels and snap the panels together. (fig 16.1)
B: Place the Roof Panel assembly over the Gable Assembly and attach to the (2852) Roof Ends using 12 (S11)
#8 x 2" Wood Screws. (fig 16.1)
C: Install 2 (S11) #8 x 2" Wood Screws along the roof peak as shown in fig. 16.1, attaching the roof panels
together. (fig 16.1)
S11
Gable Roof Panel
Fig. 16.1
Gable Roof Panel
Hardware
14 x
#8 x 2" Wood Screw
S11
49
S11
2852
x 3 per
S11
side
Other Parts
2 x Gable Roof Panel
Advertisement
Table of Contents
