P# (Destination Phone Number); N1 (Dns Address); N2 (Dns Address); Dl (Destination Address) - Digi XB3-C-A2-UT series User Manual

AT commands
In API mode, the address is represented as the binary four byte big-endian numeric value representing
the IPv4 address.
In Transparent or Command mode, the address is represented as a dotted-quad string notation.
Parameter range
0- 15 IPv4 characters
Default
0.0.0.0

P# (Destination Phone Number)

Sets or displays the destination phone number used for SMS when
must be fully numeric, 7 to 20 ASCII digits, for example: 8889991234.
P# allows international numbers with or without the + prefix. If you omit + and are dialing
internationally, you need to include the proper International Dialing Prefix for your calling region, for
example, 011 for the United States.
Range
7 - 20 ASCII digits including an optional + prefix
Default
N/A

N1 (DNS Address)

Displays the IPv4 address of the primary domain name server.
Parameter Range
Read-only
Default
0.0.0.0 (waiting on cellular connection)

N2 (DNS Address)

Displays the IPv4 address of the secondary domain name server.
Parameter Range
Read-only
Default
0.0.0.0 (waiting on cellular connection)

DL (Destination Address)

The destination IPv4 address or fully qualified domain name.
To set the destination address to an IP address, the value must be a dotted quad, for example
XXX.XXX.XXX.XXX.
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
Addressing commands
IP (IP Protocol) = 2. Phone numbers
103