At Command Response - 0X88 - Digi XB3-C-A2-UT series User Manual

Operate in API mode

AT Command Response - 0x88

Description
A device sends this frame in response to an AT Command (0x08) frame. Some commands send back
multiple frames.
Format
The following table provides the contents of the frame. For details on frame structure, see
format.
Field Field
name value
Frame 0x88
type
Frame ID
AT
command
##
Status
Parameter
value
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
Data
type Description
Byte
Byte Identifies the data frame for the host to correlate with a subsequent
ACK. If set to 0, the device does not send a response.
Byte Command name: two ASCII characters that identify the AT command.
Byte 0 = OK
1 = ERROR
2 = Invalid command
3 = Invalid parameter
Byte Register data in binary format. If the register was set, then this field is
not returned.
Frame descriptions
API frame
132