Firmware Version/Information Commands; Vr (Firmware Version); Vl (Verbose Firmware Version); Hv (Hardware Version) - Digi XB3-C-A2-UT series User Manual

AT commands
PYV (Version Report)
Report the MicroPython version.
PY^ (Interrupt Program)
Sends KeyboardInterrupt to MicroPython. This is useful if there is a runaway MicroPython program
and you have filled the stdin buffer. You can enter Command mode (+++) and send ATPY^ to interrupt
the program.
Default
N/A

Firmware version/information commands

The following AT commands are firmware version/information commands.

VR (Firmware Version)

Reads the firmware version on a device.
Parameter range
0 - 0xFFFF [read-only]
Default
Set in firmware

VL (Verbose Firmware Version)

Shows detailed version information including the application build date and time.
Parameter range
N/A
Default
Set in firmware

HV (Hardware Version)

Read the device's hardware version. Use this command to distinguish between different hardware
platforms. The upper byte returns a value that is unique to each device type. The lower byte indicates
the hardware revision.
Parameter range
0 - 0xFFFF [read-only]
Default
Set in firmware

AI (Association Indication)

Reads the Association status code to monitor association progress. The following table provides the
status codes and their meanings.
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide

Firmware version/information commands

119