Network Commands; Ip (Ip Protocol); Tl (Ssl/Tls Protocol Version) - Digi XBee Cellular LTE Cat 1 User Manual

AT commands
0 - diversity disabled
1 - diversity enabled
Default
1

Network commands

The following commands are network commands.

IP (IP Protocol)

Sets or displays the IP protocol used for client and server socket connections in IP socket mode.
Parameter range
Value Description
0x00 UDP
0x01 TCP
0x02 SMS
0x03 Reserved
0x04 SSL over TCP communication
Default
0x01

TL (SSL/TLS Protocol Version)

Sets the SSL/TLS protocol version used for the SSL socket. If you change the TL value, it does not
affect any currently open sockets. The value only applies to subsequently opened sockets.
Note Due to known vulnerabilities in prior protocol versions, we strongly recommend that you use the
latest TLS version whenever possible.
Range
Value
0x00
0x01
0x02
0x03
Default
0x03
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
Description
SSL v3
TLS v1.0
TLS v1.1
TLS v1.2

Network commands

53