Appendix B: Location Builder Tool - Avaya CS 1000 Fundamentals

Appendix B: Location builder tool

The Location Builder in IP DECT Release 5.2 differs from the Location Builder in previous releases. You
can import files from the previous versions into this new version. The user interface of this Location Builder
allows you to use images/pictures of floors in buildings. We would strongly recommend to use images/
pictures instead of making drawings in the Location Builder. The images/drawings can be type: jpg, bmp,
gif.
In this chapter, you will find a procedure on how to use the Location Builder with using jpg images/pictures
of the floors.
Please note that the procedure below is just an example. The Location builder tool offers more possibilities
than described here.
Please note that when you create a building, it is just a name/label. Then you should add a floor to it. This
first floor determines the size and position of your building.
PROCEDURE: "Example of Using the Location Builder with jpg Image Files"
Actions
1. Startup the Location Builder from the Start > All programs>DAP Controller > DAP Applications.
2. Now you will see the following screen displayed
SIP DECT Fundamentals October 2012 183