Table of Contents
Advertisement
10. Insert a new MEM card and click OK .
11. . Perform this step for each DN of the range entered in the subscription file.
12. Import subscriptions from the subscription files to the SIP DECT system. For more
Handset subscription
The DECT Handset Configurator lets you subscribe a handset using a subscription file without
entering a PARK and PIN code.
Related topics:
Creating a subscription file
Importing a subscription to the image
Creating a subscription file
To create a subscription file, perform the following steps:
1. Create a Comma Separated Value file (a text file with .csv extension).
2. Select Tools > Create Subscription File from the menu.
3. Enter the PARI and SARI (if required) of the DECT system.
SIP DECT Fundamentals
When the process is finished, you will have a number of MEM cards. Each card
contains the set of configuration parameters from the image file and a subscription
from the subscription file.
information, see
Subscription export and import
on page 247
Each line contains a handset name and DN from the DN range required for
subscriptions.
For example, if you need to subscribe handsets in the DN range of 5001...5020,
then enter all handset names and DNs from the range line, by line and separated
by a comma, as shown in the following example:
Peter Adams, 5001
Alex Scott, 5002
....
Bob Reid, 5020
Note:
Alternatively, instead of creating a .csv file, you can use a Central Directory (.xls
file) or 4060/4065 telephone book (.tfb file) as a source for the DN range.
on page 134.
on page 248
Main operations
October 2012
247
Advertisement
Table of Contents
