Table of Contents
Advertisement
information about Microsoft Windows 2003 DHCP and TFTP server installation and
configuration, see DHCP and TFTP servers.
The DAP controller software includes DHCP and TFTP servers that you can configure from
the IP DECT Configurator. For more information about built-in DHCP and TFTP servers, see
Built-in DHCP and TFTP servers
You can create a DAP configuration without DHCP or TFTP; however DHCP and TFTP must
be available to program or reprogram DAPs. For more information about DAP configuration
without DHCP or TFTP, see
page 90.
If you prefer to use Microsoft Windows DHCP and TFTP servers, perform the steps in
and configuring Microsoft Windows DHCP server
servers. Perform the steps in
TFTP servers.
If your DHCP server supports Vendor Class Identification option 60, use a specific IP address
range for the DAPs. The Vendor Class Identification of the DAPs is D(ECT)AP 49.
Installing and configuring Microsoft Windows DHCP server
Ensure that your DHCP server provides the following data to the DAP.
You can install the DHCP server on the same server or on another PC that runs the
TFTP server.
The Microsoft DHCP server installation files are located on the Microsoft Windows
2003 Server CD-ROM package. Licensing or registration charges or both may apply.
You can install the DHCP server on the same server on the same server or on another PC that
runs the TFTP server. The Microsoft DHCP server (Windows 2003) is in the Microsoft Windows
2003 Server CD-ROM package.
The following procedures give examples of setting up the DHCP server under Windows 2003
Server.
Configuring DHCP server under Windows 2003 server
1. From the Start menu, open the Control Panel in Windows.
2. Open Add/Remove Programs.
3. Click Add/Remove Windows Components.
4. Select Networking Services and click Details.
SIP DECT Fundamentals
DAP configuration without DHCP or TFTP servers
Installing the TFTP server
• IP Address
• Subnet Mask
• Default Gateway IP address
• Next Boot Server IP address that is the IP address of the TFTP server (DHCP
option 066)
• Configuration file name (dapcfg.txt) available through the TFTP server (DHCP
option 067)
on page 86.
on page 77 to install and configure DHCP
DAP controller software
on page 84 to install and configure
October 2012
on
Installing
77
Advertisement
Table of Contents
