Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line Gateway
Enabling or re-enabling the DAPs
To enable or re-enable the DAPs, start the DAPs.
DAP manager configuration
The following procedures are described in this section.
•
Restarting DECT Access Points
•
Adding number range
•
Subscribing a DECT handset
Restarting DECT Access Points
You must restart the DECT Access Points (DAP) following software upgrades.
Restartng DECT Access Points
1. Start DAP manager by entering the following URL into an internet browser:
2. Select Access Points from the menu on the left.
SIP DECT Fundamentals
time expires, IP DECT Configurator will be closed, but all services will be up and
running. To stop the timer open any configuration tab.
on page 104
localhost/cds
The DAP manager IP DECT page appears.
The Access Points page displays information about the DAPs.
DECT Access Points are identified by their Radio Part Number (RPN). In the DAP
Manager workspace, the status of the DAPs appear. You can modify the RPN of a
DAP by editing the RPN field.
on page 103
on page 104
October 2012
103