Appendix A: G.729 daughterboard and DAP
This chapter contains information about procedures to mount the G.729 daughterboard and 4720 DECT
Access Point (DAP) against the wall, and adjust the antenna position.
Navigation
•
Mount the G.729 daughterboard
•
Adjusting the antenna position
•
Mounting the 4720 DAP on a wall
Mount the G.729 daughterboard
Use this procedure to install the G.729 daughter board.
Mounting the G.729 daughterboard
1. Make sure that you have the G.729 Daughter board.
2. Open the cabinet.
3. Take the PWB out of the cabinet.
SIP DECT Fundamentals
wall mounting
Important:
Use caution when handling the PWB; the light conductor for the LEDs can drop
off.
on page 175
on page 177
on page 180
October 2012
175