Table of Contents
Advertisement
Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line Gateway
4. In the General Settings window, enter the path to the firmware, the DAP package
5. Click Apply.
Configuring IP Settings
1. On the Settings pane, click IP Settings.
2. In DAP Controller IP Configuration tab Enter the DAP controller Configuration:
3. In the Proxy IP Configuration tab enter the Proxy IP address, which is the SIP
4. Click Apply.
Configuring Network Settings
1. In the Settings pane, click Network Setting.
2. In Network card settings tab select the network card that is connected to the SIP
SIP DECT Fundamentals
file; for example, C:\tftpdroot\4910b524.dwl.
The IP Settings page appears.
DC IP address, which is the IP address of the PC where your DAP controller is
installed. An example of this address is 192.168.100.10.
LINE Gateway Node IP address; for example, 192.168.100.105, and Proxy port
number (5070 by default for SIP LINE)
The IP DECT Configurator Network Settings window appears.
DECT system.
October 2012
95
Advertisement
Table of Contents
