Table of Contents
Advertisement
4. Click the Filter menu, and choose the required filter type. For an explanation of the
5. To disable the Filter, click the Filter and select No Filter from the list.
Table 19: Filter types
Filter type
DNR filter
RPN filter
Subscriptions
status filter
Presence status
filter
Registration
status filter
SIP DECT Fundamentals
TheFilters page appears.
various filter types, see
Use the DNR filter if a list of subscriptions is long and it is difficult to find
certain extension numbers or DNRs. Also, use the DNR filter to look at
only a part of the list of extension numbers or DNRs. In the case of an
Exact match, enter the number range in the To field and in the From field.
In the case of aStarting with , enter the first digit or digits in the From
field. Select the option that applies - either Exact matchor Starting with
- and click OK.
Use the RPN filter to look at the subscription records on the specific DAP.
To activate the filter, select the required RPN.
Use the Subscriptions status filter to look at the subscription records with
some specific status (for example, free, enable, subscribed, black listed).
To activate the filter, select the required status.
Use the Presence status filter to look at the subscription records with
some specific status (for example, unknown, present, absent). To activate
the filter, select the required status.
Use the Registration status filter to look at the subscription records with
some specific status (for example, registered, absent). To activate the
filter, select the required status.
Table 19: Filter types
Description
Subscription management
on page 127.
October 2012
127
Advertisement
Table of Contents
