Table of Contents
Advertisement
Software requirements
Built-in DHCP and TFTP servers
The DAP controller software has a built-in DHCP and TFTP server. The built-in DHCP and
TFTP servers do not require manual configuration, because the IP DECT Configurator
performs the configuration.
Important:
You can configure a Built-in DHCP and TFTP server only after you install the IP DECT
Configurator. For more information, see
Built-in DHCP server
The DAP controller software has a built-in DHCP server. This server runs as an application
that requires you to log on to Microsoft Windows. You can use the IP DECT Configurator tool
available under DAP controller to start or stop the DHCP server program.
This DHCP server responds to DHCP requests from DAPs because it checks on Vendor Class
Identification D(ECT) AP 49 from a DAP.
86
SIP DECT Fundamentals
DAP Controller
Comments? infodev@avaya.com
on page 90.
October 2012
Advertisement
Table of Contents
