System maintenance
Removing DAP Controller software
1. Start the IP DECT Configurator. Click Start > All programs > DAP controller >
2. Click Activate/Deactivate/System Status.
3. Click Deactivate all.
4. Close the IP DECT Configurator tool.
5. Click Start > Settings > Control Panel.
6. Double-click Add/Remove Programs.
7. Click Change or Remove programs.
8. Select DAP Controller.
9. Click Remove.
10. Click Yes to confirm DAP Controller deinstallation.
DAP Controller software update
Update the DAP Controller software.
Updating the DAP Controller
1. In the IP DECT Configurator main window, click Upgrade Installation.
2. Click Browse for New DAP Controller software field, browse to the folder where the
3. Optionally click Browse for New DAP firmware field, browse to the folder where the
4. Stop IIS Admin and Diag@Net services using the buttons on the screen.
5. Click Install and follow the procedure.
168
SIP DECT Fundamentals
DAP Applications > DAP configurator.
A list of installed programs appears.
new installation file (the new DC release) is stored, select it, and click Open.
new firmware (the DAP package file) is stored, select the DAP package file, and
click Open.
Important:
PC restart maybe required after the system is upgraded.
Comments? infodev@avaya.com
October 2012