Table of Contents
Advertisement
15. Connect the RJ45 connector to the 4720 DAP (at the rear side) and push the
16. Push the 4720 DAP into its position in the foam.
17. Mount the cover of the cabinet onto the cabinet with the four plastic screws in each
SIP DECT Fundamentals
Figure 67: Cable run in the Cabinet
Category 5 Ethernet cable into the round foam-free area in the rear side of the
cabinet.
Figure 68: 4720 DAP in position in the cabinet
corner of the cover. The cabinet is now closed.
Figure 69: Mounting the cover
Installing 4720 DAP with internal antennas
October 2012
221
Advertisement
Table of Contents
