Table of Contents
Advertisement
System synchronization analysis
This type of view, shows you the selected DAP and it shows you the DAPs that the selected
DAP can see. The selected DAP is flashing its colour in the synchronization tree and dark red.
In the example above, RPN 018 is the selected DAP. The DAPs that have a colour are seen
by the selected DAP.
• Show duplicate DAPs
This option is only used in a system with more than 256 DAPs. In that case the two digits RPN
numbers are duplicated in the air. Please note that the duplication is only in the air. In the IP
DECT system the DAPs have a three digit RPN number.
• Show DAPs seeing max. nr of other DAPs.
This is related to the "max. number of daps seen" in the Settings menu. By default the maximum
number of DAPs seen is set to 19. This means that you will see all DAPs that can see 19 or
more other DAPs.
• Show DAPs seeing min. nr. of other DAPs
This is related to the "min. number of daps seen" in the Settings menu. By default the maximum
number of DAPs seen is set to
1. This means that you will see all DAPs that can see 1 or less other DAPs.
SIP DECT Fundamentals
October 2012
161
Advertisement
Table of Contents
