Table of Contents
Advertisement
System administration
13. Using the handset you are subscribing, access the System configuration menu,
14. If the handset requests a Portable Access Rights Key (PARK) code, enter the PARK
15. Enter the displayed PIN code.
16. Enter the name of the target SIP DECT system and the DN.
17. Click Export (Prepared).
18. Navigate to the folder where you want to store the file.
19. In the Name field, enter a name for the new file.
20. Click OK.
21. Click Clear Host.
22. Click Back to Main.
Import subscriptions
Prerequisites:
• All portables must be subscribed.
• For multi-site subscriptions, all systems must have the same SARI.
Importing subscriptions
1. Open Internet Explorer and enter the following URL in the address field: localhost/
2. Click Pack Up & Go.
3. Click Import.
136
SIP DECT Fundamentals
and choose New system.
For information about accessing this menu, and other handset configuration
information, see the handset User Guide.
code.
You can find the PARK code on the left at the bottom of the page.
A PARK code is required only if there are overlapping DECT systems in your
location; if only one DECT system is available in your location, a PARK code is not
required.
You must enter the PIN within 16 minutes; otherwise, the system terminates the
subscription mode for that extension number, and you must begin the subscription
process from the beginning.
You can find the name of the system and the DN on the handset display. The status
of the configuring subscription record changes from "Enabled" to "Subscribed".
The Export page appears.
cds.
The DAP manager IP DECT page appears.
Comments? infodev@avaya.com
October 2012
Advertisement
Table of Contents
