Table of Contents
Advertisement
Figure 25: Identify new critical points (P11, P12, P13, P14, P15, P16, P17)
Use the following procedure to mark additional cell boundaries and define the extent of the
coverage area.
Demarcate additional cell boundaries to cover all areas of the building
Repeat the procedures
and labeling new critical points
at the middle of the building.
Critical points P11, P13 and P16 form the following:
Critical points P11, P12, and P17 form the following:
SIP DECT Fundamentals
Identifying critical points on the floor
• contours in
Figure 26: Contours formed by critical points P11, P13, and P16
page 56
• the cell center 1C5 in
P13, and P16
on page 56
• a new cell boundary in
P13, and P16
on page 57
• contours in
Figure 29: Example of critical point cell boundaries
• a new boundary based on cell center 1C6 in
boundary 1C6
on page 58
on page 52 as necessary to mark new cell boundaries
Figure 27: Cell center 1C5 formed by critical points P11,
Figure 28: Cell boundary 1C5 formed by critical points P11,
System deployment
on page 45 to
on page 57
Figure 30: Example of cell center
October 2012
Marking
on
55
Advertisement
Table of Contents
