Table of Contents
Advertisement
System maintenance
6. Click Set Subscription Management File. A file requester appears.
7. Navigate to the directory C:\..\PM\ on the DAP controller or manager PC, and
8. Click Set Filter and Browse to filter the data that appears in the window.
Table 22: Job aid
Filter buttons
Set filter Filter by Start
time End time
Browse Radios Browse
Calls
Using DAP Synchronization Analyzer
1. Click Start > All programs > DAP controller > DAP Applications > DAP Sync
2. From the menu, choose File > Open. A file requestor appears.
3. Select the file visadm.txt, and click Open.
4. Use the commands in the menu View to analyze the synchronization structure.
5. Optionally, use the commands in the menu View to troubleshoot the structure.
6. Optionally, load a location file. The location file contains a site map with buildings
7. Optionally, load a Traffic Bearer Control (pmtbc.dat) data file. This file contains
164
SIP DECT Fundamentals
choose the file sm.xml. This file contains the relations between the PMIDs to the
Extension numbers. After the file loads, an extra column appears in the data pane
to show the extension number.
Click Set Filter to apply a filter to the information that appears in
the data pane.
Click the Browse buttons to browse between calls or radios.
Analyzer.
and floors in which the DAPs are positioned. Use the site map to quickly determine
the position and range of a specific DAP. You can create a Location file using the
Location Builder tool. For more information, see
page 183.
statistics and logging information about traffic bearers. To open this file, choose
Tools > Track Portable. A file requestor appears.
Comments? infodev@avaya.com
Description
Location builder tool
on
October 2012
Advertisement
Table of Contents
