Table of Contents
Advertisement
System configuration
22. If you check Use client resolution, you can no longer scroll through lists; instead,
23. Click Apply.
Configuring other settings—Customer Information settings
1. Click Customer Information.
2. In the Customer Information window, enter customer information.
Saving the system
1. To save the new system you created with the IP DECT Configurator, click Apply,
2. If a message appears instructing you to activate the system, click OK, and go to the
3. In the System Control pane in the left of the IP DECT Configurator main window,
4. Click the Activate all button.
102
SIP DECT Fundamentals
tries to send an archive and it takes longer than the time specified here, the attempt
is terminated.
the available information is broken into pages. You can select pages using tabs. If
this box is unchecked, you can scroll through the information using the scroll bar.
The information is still separated into pages, but each page contains more
information.
The Customer Information window appears.
This window is for administrative purposes only. The system does not use this
information.
and then click Save system.
last step in this procedure.
click Activate/Deactivate/System Status.
The Activate/Deactivate/System Status window appears.
Note:
After you have activated the system in the IP DECT Configurator window you will
see a timer, indication the time left before the program will be closed. When the
Comments? infodev@avaya.com
October 2012
Advertisement
Table of Contents
