Avaya CS 1000 Fundamentals page 91

2. InstallShiled Wizard will install and configure required services on your PC (Internet
3. Click Next.
4. Two types of DAP Controller installation are available. Select one of the following:
5. Click Next.
6. Select Standard, and click Next. To customize the installation, select Custom.
7. Click Next.
8. Click Next.
SIP DECT Fundamentals
Depending on the directory structure on the CD-ROM, the setup.exe file is on Disk
1.
The InstallShield Wizard appears. This window remains visible while you install
the DAP controller components and gives you information about the installation
progress.
After the PC restarts, it automatically continues with the DAP controller installation.
The DAP controller - InstallShield Wizard page appears.
Information services, MS .Net Framework). Depending on your the installed
services, a message appears requesting that the PC restart is required.
The System Type page appears.
• Select Single System if you plan to manage only one SIP DECT system with
your PC. Avaya recommends this option unless you install DAP Controller on
a laptop PC to be carried between SIP DECT systems to manage them.
OR
• Select Multiple Systems to manage more than one SIP DECT system with
your PC. This option is meaningful for a laptop PC to be carried from one SIP
DECT system to another to configure and maintain them. You can select this
option when installing a DAP Controller dedicated to a specific SIP DECT
system; in such a case, the DAP Controller operates as it would in Single
System mode.
You cannot use DAP Controller PC in more than one system at the same time. With
a Multiple Systems installation type, you can activate one of the configured SIP
DECT systems and make changes.
The DAP Controller PC can work with only one active SIP DECT system. Avaya
recommends that you configure a dedicated DAP Controller PC in each SIP DECT
system. If you cannot dedicate a DAP Controller PC in each SIP DECT system,
then you can use a laptop PC with DAP Controller installed and temporarily connect
that laptop PC to the networks where each SIP DECT system is installed (the option
Multiple Systems exists to support that configuration). Some functions of SIP DECT
system are not available when no dedicated DAP Controller PC is available in the
system.
The Setup Type page appears.
The Select Installation Address page appears.
Do not change the default values in the fields CDS and Port Number.
DAP controller software
October 2012 91