Scanning Parameters - Axis 7000 User Manual

AXIS 7000/FX User's Manual

Scanning Parameters

Profile
From the AXIS 7000/FX control panel, press Menu
through the scanning menu. Use
The table below describes the available parameters for each destination
type:
Parameter
Send to
Sent by
Subject
Number of copies
Profile
Paper size
Double sided
Note:
If you do not specify anything, the default settings will be used.
The AXIS 7000/FX comes pre-installed with 10 standard profiles
designed to cover most needs. Refer to "Predefined Profiles "on page
88 for details.
The profiles are maintained by the Administrator. If you have been
granted permission by your administrator, you can define your own
temporary profiles. For details, refer to "Adding Temporary Profiles"
on page 86.
Select a profile appropriate to the document to be scanned. Documents
typically use one of the Text profiles. Pictures could use one of the
Text/Photo, Gray or Color profiles.
Scanning color images to JPEG/JFIF can be time consuming due to the
amount of computation performed by the AXIS 7000/FX. You should
therefore avoid using a higher resolution than is really needed. "Color
low" (75 dpi) is normally sufficient for web publishing of color images.
If you intend to manipulate a scanned color image using an image
editor, it is recommended that you use uncompressed TIFF.
Using the AXIS 7000/FX
to find the desired value.
Destination Type
E-mail /URL FTP
yes yes
yes no
yes no
no no
yes yes
yes yes
yes yes
to scroll
Printer
yes
yes
no
yes
yes
yes
yes
87