Axis 7000 User Manual page 40

40
Configuring the AXIS 7000/FX
Services Overview
The table below provides an overview of information and services
available from this page
Button
Wizard
Detailed View
Restart Server
View Settings
AXIS 7000/FX User's Manual
Description
Guides the user through the setup procedures for the fol-
lowing protocols - TCP/IP, E-mail (SMTP) and the Exter-
nal Address book.
Note: You cannot set up all of the supported protocols
with one pass of the Wizard. After completing one proto-
col, you then return to the Network Settings Wizard page
where you can optionally proceed with another protocol.
Displays the Protocols page that allows all of the sup-
ported protocols to be set up within a single dialog.
Restarts the AXIS 7000/FX. LED indicators flash during
startup and self test. When they have stopped and the
Network indicator starts flashing to indicate network ac-
tivity, the unit is ready for use. New configuration set-
tings will then become active.
Note: Clicking Restart deletes all temporary destination
and profiles.
Lists the current parameter settings in the configuration
file.