Axis 7000 User Manual page 23

AXIS 7000/FX User's Manual
8. Press Select
Edit router:
000.000.000.000
9. To change the value, repeat steps 4 - 6 above.
10. Press Menu
Net mask:
000.000.000.000
11. Press Select
Edit net mask:
000.000.000.000
12. To change the value, repeat steps 4 - 6 above.
13. Press Menu
editable. The node address should equal the AXIS 7000/FX serial
number found on the underside label of the unit.
14. Press Menu
. . .
. .
Press if you
. .
are finished
15. Press Select
completes the startup sequence.
16. Write the name or IP address of the AXIS 7000/FX on the supplied
Instructions label and attach it to the top cover.
The AXIS 7000/FX is ready for use when the Status indicator stops
flashing and remains lit.
Note:
If you make a mistake while editing the parameters, press the Cancel key
on the control panel to cancel the operation.
to edit the default router address:
to display the subnet mask setting:
to edit the subnet mask:
to display the node address. This address is not
once more to display the final instructions:
to exit the IP settings. The AXIS 7000/FX then
Basic Installation
23