Axis 7000 User Manual page 81

AXIS 7000/FX User's Manual
Note:
Press the Cancel button to reset all temporary settings to the default
values.
6. Insert a single page into the flatbed or a stack of paper into the sheet
feeder of the attached digital copier/scanner.
One single page or a stack of paper in the sheet feeder:
a. Press Send
step.
Several separate pages or stacks of paper:
a. Press Add
b. Insert the next page or stack and press Add
procedure until all the pages have been scanned.
c. Press Send
During the scanning this message appears on the display:
Scanning #1
please wait
Note:
If you do not press Send within 60 seconds after scanning a page by
pressing Add the scan job will automatically be finished and sent.
7. When you have pressed Send
image is completed, the AXIS 7000/FX is released for other users to
access.
Notes:
• By scanning multiple pages, you can accumulate several pages into
one image file. See "Multipage Image Files" on page 82.
• If no operations are performed within five minutes of allocation, the
AXIS 7000/FX will return to its default settings.
• The AXIS 7000/FX keeps all temporary settings in memory for 60 sec-
onds from the last scan, and then resets all settings to the default
settings.
Note: if authentication is enabled the time span before memory reset
is set by the administrator.
Using the AXIS 7000/FX
to scan and send the image to the destination in one
to scan each page or stack.
to transmit the image to the destination.
and the transfer of the document
again. Repeat the
81