Axis 7000 User Manual page 43

AXIS 7000/FX User's Manual
Configuring the TCP/IP
Settings
Note:
The AXIS 7000/FX configuration parameters are fully described in "The
Parameter List" on page 111.
Follow the instructions below to configure the TCP/IP settings:
1. From the Protocols dialog, click the TCP/IP tag.
2. Check the appropriate checkbox to define your preferred method for
setting the IP Address automatically, i.e. DHCP, BOOTP or RARP. For
further information on these methods, refer to "Assigning an IP
Address "on page 21.
Notes:
• If DHCP, BOOTP or RARP is enabled, your manual settings might be
overridden when you restart the AXIS 7000/FX.
• Depending on how your network has been configured, other Internet-
related parameters such as the default router, subnet mask, mail
server, time server etc. might also be set automatically. However, it is
recommend that you verify the settings when the AXIS 7000/FX has
been restarted and then enter any missing parameters manually.
Configuring the AXIS 7000/FX
43