Axis 7000 User Manual page 100

100
Troubleshooting
Message
SCSI command sequence
illegal
Invalid field in SCSI
parameter list
Scanner not ready, please
check scanner and restart
the scan server
A timeout has occurred on
the scanner, the job has
been canceled
Out of memory
Out of scanner image
memory
Unresolved name:
<server name>
Not available:
<server address>
Login failed:
<server address>
Disconnected:
<destination>
No valid mail recipient
found
Illegal address
<recipient>
Illegal directory on:
<server address>
Unable to open file on:
Write error on:
<server address>
No info file on:
<server address>
AXIS 7000/FX User's Manual
Description
The scanning device cannot receive the SCSI com-
mands in the order they were sent. Contact your AXIS
7000/FX dealer.
The SCSI parameter block includes one or several in-
valid fields. Contact your AXIS 7000/FX dealer.
An error has occurred in the scanning device. Check
the scanning device and restart the Document Server.
Please check the scanning device and try again.
The document image contains too much data. Please
try another profile.
The document image contains too much data. Please
contact your equipment supplier.
Cannot find the IP address mapped to <server name>.
Cannot establish communication with the server spec-
ified in <server address>. Please try again later.
Incorrect FTP server password specified for the file
destination.
The connection to the destination specified in <desti-
nation> has been lost. The image transfer has been
aborted.
All the selected e-mail destinations were incorrect.
Incorrect e-mail address specified for the e-mail des-
tination.
The directory specified for the file destination does not
exist.
Default file name is missing.
Insufficient access rights to the directory specified for
the file destination.
The information file could not be stored on the FTP
server. Possible reasons are lack of memory or naming
conflicts. The image file will be removed.