Axis 7000 User Manual page 24

24
Basic Installation
Verifying the Network
Settings
Using a PC keyboard
Access the Advanced menu from the AXIS 7000/FX control panel to
verify that the chosen network settings are correct, as described below:
1. Press and hold down the Menu key
pressing the Select key
2. Use to find the Network Settings option.
3. Press Select
4. Use
to scroll through and check the parameter settings.
Connecting a PC compatible keyboard directly to the Mini-DIN
connector of your AXIS 7000/FX provides a quick and convenient
method for managing the unit and setting the IP address during system
start up. Follow the procedures below to set the IP Address from the
keyboard.
Note:
The Administrator can disallow this function from the Web-based
Administration pages. For further details refer to "User Options" on page
38.
1. The following commands are for the setup of the IP parameters at
start-up only. If the keyboard is not already connected, make sure
that the AXIS 7000/FX power supply is disconnected before
connecting the keyboard to the Mini-DIN connector located on the
rear panel.
Connect the AXIS 7000/FX power supply and Press Tab when the
following message appears:
AXIS 7000/FX
Version 1.00E
2. After a few seconds the following message will appear:
IP address:
000.000.000.000
3. Press Enter to edit the IP address:
Edit IP address:
000.000.000.000
AXIS 7000/FX User's Manual
. The Advanced menu is displayed.
to enter the submenus.
while simultaneously