Axis 7000 User Manual page 59

AXIS 7000/FX User's Manual
Note:
The user can specify another profile from the AXIS 7000/FX control panel
at the moment of scanning. <Default-xx> is the default value specified
on the Destination Defaults page.
6. With reference to the table below, select the amount of information
to be included with the image:
Option Description
<Default-xx> Default value specified on the Destination Defaults page
<Complete> Information about the AXIS 7000/FX, the connected digital
copier/scanner, the parameter settings used when scanning etc.
<Basic> Includes the image-related profile settings
<None> Does not include any information
7. Specify the name or IP address of the FTP server on which the
scanned image will be stored in the FTP Server field.
8. Specify the user name for logging on to the FTP server in the User
field.
Note:
Leaving the User field blank causes the user and password defined in the
Destination Defaults page to be used.
9. If required, specify the password for logging on to the FTP server.
Repeat the password in the Confirm field to check the spelling and
syntax.
10. Specify the directory on the FTP server where the image will be
stored.
11. Define the file name of the scanned image.
Note:
The filename defined in the Destination Defaults page is used if the
Filename field is left blank.
Configuring the AXIS 7000/FX
59