Axis 7000 User Manual page 37

AXIS 7000/FX User's Manual
The Edit Button
General
Date & Time
Click the Edit button to display the This AXIS 7000/FX - Edit Page.
Clicking the appropriate tag displays the General, Date & Time, User
Options, International, and Authentication settings for your AXIS
7000/FX as described below:
Server Password and Confirm
This is the Administrator password required for accessing the AXIS
7000/FX for administration tools.
To change the password, simply enter your new password in the Server
Password field. Repeat the new password in the Confirm field to check
the spelling and syntax.
Notes:
• It is recommended that you change the password of your AXIS
7000/FX as soon as possible, since all Axis products are shipped with
the same password as default.
• If you lose the Server password, you must restore the factory default
settings. See "Restoring Factory Default Settings "on page 95.
• An asterisk * is displayed for each alphanumeric character that com-
prises the password in the Server password field of the This AXIS
7000/FX page.
If you are using time synchronization, specify the time zone in which the
AXIS 7000/FX operates. UTC is Universal Time Coordinated which used
to be known as Greenwich Mean Time (GMT), i.e. the local time at the
Greenwich meridian (zero degrees longitude). No_DST means that
automatic adjustment for DST (Daylights Savings Time) is not included.
However, the country specific time zones include adjustment for DST.
The AXIS 7000/FX has a built-in real time clock with a back-up battery
which will keep the time when the power supply is disconnected.
Automatically using the Network Time Protocol (NTP)
Click here to obtain date and time information from a time
synchronization source. Time stamps are used in the event log.
NTP Server
Specify the name or IP address of the NTP server used for time
synchronization.
Manually
Click here to set date and time manually.
Configuring the AXIS 7000/FX
37