Axis 700 User Manual
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Server
  5. 700
  6. User manual

Axis 700 User Manual

Network scan server
Hide thumbs Also See for 700:
Table of Contents

Advertisement

Quick Links

Download this manual
AXIS 700 Network Scan Server
The Plug-and-Play Solution for
Distributing Scanned Information
Across Networks
U s e r's M a n u a l v 1 . 2

Advertisement

Table of Contents
loading

Related Manuals for Axis 700

Summary of Contents for Axis 700

  • Page 1 AXIS 700 Network Scan Server The Plug-and-Play Solution for Distributing Scanned Information Across Networks U s e r's M a n u a l v 1 . 2...
  • Page 2 AXIS 700 User’s Manual AXIS 700 Network Scan Server User’s Manual...
  • Page 3 Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform us at an address which can be found in the last appendix of the manual. AXIS Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice.

  • Page 4: About This Manual

    The manual provides introductory information as well as detailed instructions on how to set up and manage the AXIS 700 in various network environments. It is intended for everyone involved in installing and managing the AXIS 700. To fully benefit from the manual, you should be familiar with basic networking principles.

  • Page 5: Support Services

    Axis User Group - Joining the Axis User Group will provide you with a number of benefits, such as regular product updates, access to the latest technology information and much more. And the best part of it is that it is all for free!.

  • Page 6: Table Of Contents

    Introduction ..........7 The AXIS 700 Network Scan Server ......7 Features and Benefits .
  • Page 7 Table of Contents AXIS 700 User’s Manual Appendix A Troubleshooting ..........69 Restoring Factory Default Settings .

  • Page 8: Section 1 Introduction

    The AXIS 700 is a stand-alone unit, located beside the scanning device. You need one AXIS 700 for each scanning device. We suggest that you place the scanning device and the AXIS 700 in the workgroup area, e.g. next to your printers and facsimile machines.

  • Page 9: Features And Benefits

    Explorer. Thus, the AXIS 700 can be accessed from Windows, OS/2, Macintosh and UNIX workstations. The support includes scanning to Web browser and Administration tools. The AXIS 700 is designed to be as easy as possible to install and use: Ease of Use •...
  • Page 10 You can also use a standard Web browser to trigger and save scanned documents. The available range of transfer methods and image formats enables you to adapt the AXIS 700 to your needs rather than the other way around.
  • Page 11 Section 1: Introduction AXIS 700 User’s Manual...

  • Page 12: Section 2 Basic Installation

    Section 2: Basic Installation Section 2 Basic Installation This section includes a brief product description and instructions for installing the AXIS 700 in your network environment. You install the AXIS 700 in these steps: • Connecting the AXIS 700 to the scanning device •...

  • Page 13: Axis Online Cd

    By clicking the HTML button from within the main installation HTML Interface dialog, you access a Web browser interface to the contents of the AXIS Online CD. This interface allows Network Administrators to distribute the CD contents over intranet networks by simply...

  • Page 14: Physical Description

    The front panel indicators show the status of the AXIS 700. The Front Panel indicators have the following functions: The status indicator flashes during start-up and turns off when the Status AXIS 700 is ready for use. If it remains on, check the LCD for error messages.
  • Page 15 The power indicator indicates that power is connected to the AXIS Power 700. o While the AXIS 700 is idle, the Power indicator should be on, the Note: Network indicator should flash randomly, and the Status and Busy indicators should be off.
  • Page 16 Cancel selections made from the menu. It also resets error messages. o The AXIS 700 will always use the destination and scanning Note: options most recently shown, whether explicitly selected or not.

  • Page 17: Connecting The Axis 700 To The Scanning Device

    Section 2: Basic Installation AXIS 700 User’s Manual Connecting the AXIS 700 to the Scanning Device o Make sure that the power supply (AXIS PS-C, 12 V DC, 36VA or Caution! AXIS PS-E, 12 V DC, 13,2VA) included in the delivery is marked with the correct mains voltage.

  • Page 18: Assigning An Ip Address

    To establish communication with the TCP/IP environment, you must assign an IP address and optionally make up a unique host name for your AXIS 700. The IP address can be set from the AXIS 700 control panel, or using any of the conventional methods: DHCP, ARP, RARP or BOOTP.
  • Page 19 13. To change the value, repeat steps 5-7 above. 14. Press Menu to display the node address. This address is not editable. The node address should equal the AXIS 700 serial number found on the underside label of the unit.
  • Page 20 IP settings. The AXIS 700 then completes the startup sequence. 17. Note the name or IP address of the AXIS 700 on the instruction label and attach it to the top cover. When the Status indicator stops flashing and remains off, the AXIS 700 is ready for use.
  • Page 21 Section 2: Basic Installation AXIS 700 User’s Manual As an alternative to the AXIS 700 control panel, you can use one of Other Methods for these methods for downloading the IP address: DHCP, ARP, RARP Downloading the or BOOTP. All methods are enabled by default. If necessary, you can...
  • Page 22 AXIS 700 User’s Manual Section 2: Basic Installation Make sure the AXIS 700 is powered on and attached to the network. Before you begin You will need administrator privileges on the Windows NT server or System Privileges root privileges on the UNIX system.
  • Page 23 • NTP server IP address 2. Activate the scope. In the AXIS 700 configuration file, DHCP is enabled by default. The IP address and all the other settings will be downloaded automatically. You do not need to restart the AXIS 700.
  • Page 24 IP address only for 30 minutes. From then on it is locked until you restart your AXIS 700. The reason for this is to avoid accidental or unauthorized changes of the IP address. Restart the AXIS 700 to make it accept the setting of the IP address.
  • Page 25 30 minutes. From then on it is locked until you restart your AXIS 700. The reason is to avoid accidental or unauthorized change of the IP address. Restart the AXIS 700 to make it accept the setting. You can perform a restart remotely via the AXIS 700 web interface.
  • Page 26 3. Start the RARP daemon, if it is not already running. This is typically performed using the command rarpd -a 4. Restart the AXIS 700 to download the IP address. You can perform a restart remotely via the AXIS 700 web interface. See “Specifying System Settings ”on page 46.
  • Page 27 -a 4. Restart the AXIS 700 to download the IP address, default router address and subnet mask. You can perform a restart remotely via the AXIS 700 web interface. See “Specifying System Settings ”on page 46.

  • Page 28: Verifying The Installation

    Web browser such as Netscape Navigator or Internet Explorer: 1. Place a document in the scanning device. 2. Start your Web browser. 3. Enter the name or IP address of your AXIS 700 in the location/address field and press Enter. Example: http://172.19.2.254...
  • Page 29 Section 2: Basic Installation AXIS 700 User’s Manual 4. The AXIS 700 Home Page, the Scan Document page, is displayed. Click Scan. Depending on the image format specified by the profile, the Web browser will display the image in an...

  • Page 30: Configuring The Axis 700

    Network protocol settings • Destinations - E-mail addresses and file directories Optionally, you can also modify these settings. However, when installing the AXIS 700 for the first time, you can simply keep the defaults. • System settings - System information, Administrator password, language, user privileges etc.

  • Page 31: Accessing The Administration

    You can access the AXIS 700 Home Page using a standard Web browser such as Netscape Navigator or Internet Explorer. 1. Start the Web browser. 2. Enter the name or IP address of the AXIS 700 on the location/address line: Example http://172.19.2.254...
  • Page 32 • Scanning Profiles - setting up profiles • Paper Sizes - specifying paper sizes • Network Settings - specifying the parameters for the network protocols used, defining external links • Event Log - lists the latest events in the AXIS 700, e.g. error messages...

  • Page 33: Specifying Network Settings

    Section 3: Configuring the AXIS 700 AXIS 700 User’s Manual Specifying Network Settings You must set up the AXIS 700 for all the network protocols that you intend to use. Click Network Settings. Click Wizard to enter a configuration wizard that guides you Wizard through the configuration procedures for each protocol.
  • Page 34 LDAP server, or external e-mail destinations and file destinations from a server-based address book stored as a file. The external e-mail addresses will appear in alphabetical order together with existing destinations in the destination list on the AXIS 700 control panel display. Click Detailed View...
  • Page 35 If DHCP, BOOTP or RARP is enabled, your manual settings might be overridden when you restart the AXIS 700. o You can also set the IP address from the AXIS 700 control panel, see the AXIS 700 User’s Guide.
  • Page 36 Click OK to save your changes and close the dialog box, Cancel to close the dialog box without saving your changes or Apply to save your changes without closing the dialog box. Select Web (HTTP) to add a customized link to the AXIS 700 Home Web (HTTP) Page.
  • Page 37 • Reply Address - Specify the e-mail address of the person responsible for the administration of the AXIS 700. This address will be used as the sender when sending to e-mail destinations, unless the user specifies another sender at the moment of scanning.
  • Page 38 LDAP (Lightweight Directory Access Protocol) server. For more information on LDAP, see “LDAP” on page 77. Check the AXIS 700 Support Web for more information on the settings for your specific LDAP server. LDAP Server - Specify the name or IP address of the LDAP server.
  • Page 39 Filter - Specify an LDAP filter in order to reduce the length of the destination list. The filter can be a real LDAP filter, e.g. (givenName=*). You can also specify a list of conditions, e.g. mail=adm*,telephoneNumber=+1 800*. In this case, the AXIS 700 will generate a real LDAP filter. •...
  • Page 40 AXIS 700 User’s Manual Section 3: Configuring the AXIS 700 The last five fields only apply to file destinations. The Description, Transfer method and Destination fields are mandatory for all destination types. For FTP destinations, the Server field is mandatory as well. If the other fields are omitted, default values will be used.

  • Page 41: Specifying Destinations

    Section 3: Configuring the AXIS 700 AXIS 700 User’s Manual Specifying Destinations Destinations are used when sending images from the AXIS 700 control panel. A destination can be an e-mail address or a file on an FTP server. From within the Administration pages, click Destinations.
  • Page 42 AXIS 700 User’s Manual Section 3: Configuring the AXIS 700 E-mail destinations allow the users to send scanned images to E-mail Destinations e-mail addresses using the SMTP protocol. 1. Click New E-mail Destination >> to define a new e-mail destination.
  • Page 43 For a directory with many files, performance will increase if you store the sequence number on the FTP server. However, to do that, the AXIS 700 must be permitted to overwrite/delete files in the specified directory. • You can add the file extension to the file name, i.e.
  • Page 44 AXIS 700 User’s Manual Section 3: Configuring the AXIS 700 The URL for Email page specifies where images should be stored URL for Email when the URL is sent to an e-mail destination. Click URL for Email >> to identify the FTP server where the image will be stored.
  • Page 45 Section 3: Configuring the AXIS 700 AXIS 700 User’s Manual The Destination Defaults page allows you to specify default values for Destination Defaults destination specific parameters, like used profiles and file server login information. Click Destination Defaults >> to change the default values:...
  • Page 46 AXIS 700 User’s Manual Section 3: Configuring the AXIS 700 If required, you must specify a user name and password for logging in to the FTP server. Enter your user name in the User field and enter the password in the Password field.

  • Page 47: Specifying System Settings

    Section 3: Configuring the AXIS 700 AXIS 700 User’s Manual Specifying System Settings Click This AXIS 700 to display general system information. From this page, you can click: • Edit to change any of the system settings • View Settings to list the current configuration settings •...
  • Page 48 Specify country specific settings to customize the interface of the AXIS International 700: • Select the language to be used on the AXIS 700 message display. • Select which measurement units are to be used when displaying the list of defined paper sizes.

  • Page 49: Specifying Profiles

    The profile is optionally part of the destination definition. However, the user can override that setting by choosing another profile from the AXIS 700 control panel at the moment of scanning. The AXIS 700 can generate files in standard TIFF, JPEG and PDF format.
  • Page 50 Not all combinations of settings are possible. If you try to use a Note: combination that is not valid, the AXIS 700 will display an error message. Apart from the predefined profiles above we also recommend two profiles which generate PDF documents. The first recommended profile is for text documents.

  • Page 51: Specifying Paper Sizes

    Paper sizes define the size of the scanned image and are optionally part of the profile. However, the user can override that setting by choosing another paper size from the AXIS 700 interface at the moment of scanning. The AXIS 700 includes 12 predefined standard paper sizes to cover most needs.

  • Page 52: Configuring Using Ftp

    AXIS 700 User’s Manual Section 3: Configuring the AXIS 700 Configuring using FTP The AXIS 700 configuration file includes all the system parameter settings regarding network protocols, profiles, paper sizes and destinations. Follow these instructions to edit the configuration file using FTP: o Windows 95/98 has a directory called ‘config’...
  • Page 53 Section 3: Configuring the AXIS 700 AXIS 700 User’s Manual...

  • Page 54: Using The Axis 700

    Scanning parameters • Scanning to the Web browser • Viewing image files Scanning Methods The AXIS 700 supports four methods for distributing digital documents over the network: • Scanning to an e-mail destination • Scanning to a file destination •...
  • Page 55 Scanning to destinations, i.e. e-mail and file destinations, is performed Destinations directly via the AXIS 700 control panel. This is typically how the AXIS 700 will be used. However, the Administrator must first set up the destinations from the Web browser interface.
  • Page 56 Depending on the image format used, the Web browser will display the image in an associated viewer or ask you to save the file. Data is sent directly between the AXIS 700 and the user, i.e. peer-to- peer. This results in minimum network load, and normally no data will be sent over the backbone of the network.

  • Page 57: Scanning To Destinations

    Before scanning to an e-mail address or a file, the Administrator Note: must have set up the destinations as described in “Specifying Destinations” on page 40. Perform these instructions from the AXIS 700 control panel: 1. The AXIS 700 display shows “ ” when it is Send to: xxxxxx ready for use.
  • Page 58 During the scanning this message appears on the display: 7. When you have pressed Send and the transfer of the scanned image is completed, the AXIS 700 is released for other users to access. o By scanning multiple pages, you can accumulate several pages into Notes: one image file.
  • Page 59 Double-sided is only available if the scanning device supports duplexing. The AXIS 700 supports the job separation sheets that can be used with Job Separation Sheets the Canon DR-3020 scanner. A job separation sheet inserted in a stack of paper will divide the scanning job into separate image files.

  • Page 60: Adding Temporary Destinations

    Adding Temporary Destinations If you want to send a scanned document to an e-mail destination that does not appear in the destination list on the AXIS 700 display, you can add it temporarily from the Web browser interface. o The Administrator might not allow users to add temporary e-mail Note: destinations.

  • Page 61: Adding Temporary Profiles

    The Administrator might not allow users to add temporary Note: profiles. 1. Start the Web browser. 2. Enter the name or IP address of your AXIS 700 on the location/address line: Example http://172.19.2.254 3. This brings you to the AXIS 700 Home Page. Click Scanning Profiles.

  • Page 62: Scanning Parameters

    If you do not specify anything, the default settings will be used. Note: The AXIS 700 comes pre-installed with 8 standard profiles designed Profile to cover most needs. The profiles are maintained by the Administrator.
  • Page 63 Section 4: Using the AXIS 700 AXIS 700 User’s Manual o Depending on your scanning device, some profiles may not be Note: valid or useful. For instance, color profiles are useless for black/white scanning devices, unless they can do gray-scale scanning.
  • Page 64 AXIS 700 User’s Manual Section 4: Using the AXIS 700 The AXIS 700 comes pre-installed with 14 paper sizes designed to Paper Sizes cover most needs. See the table page 50. The paper sizes are maintained by the Administrator. o The default paper size is Letter.

  • Page 65: Scanning To The Web Browser

    Follow these steps to send the scanned image to your Web browser: 1. Place the material in the scanning device. 2. Start the Web browser. 3. Enter the name or IP address of the AXIS 700 on the location/address line: Example http://172.19.2.254...
  • Page 66 During the scanning this message appears on the display: 11. When you have pressed Send and the transfer of the scanned image is completed, the AXIS 700 is released for other users to access. o By scanning multiple pages, you can accumulate several pages into Notes: one image file.

  • Page 67: Viewing Image Files

    Section 4: Using the AXIS 700 AXIS 700 User’s Manual Viewing Image Files The AXIS 700 generates standard TIFF, PDF and JPEG images that are supported by most image-related applications. The AXIS 700 does not rely on any product-specific software installed on each client. Still, to be able to use the images created, you need tools for viewing and manipulating the images.
  • Page 68 AXIS 700 is compatible with them. However, this does not guarantee compatibility with all existing tools. If you find tools that the AXIS 700 does not support, we would like to know about it. You find information about how to contact us in the Preface.
  • Page 69 Section 4: Using the AXIS 700 AXIS 700 User’s Manual Applications are typically associated with a file format automatically Associating Image during the installation procedure. If not, it is recommended that you Formats with manually associate your image applications with the supported image...

  • Page 70: Appendix A Troubleshooting

    • Interpret the AXIS 700 error messages • Display the log file Restoring Factory Default Settings If required, you can restore the factory default settings to the AXIS 700. You can use one of these methods: • Reset button •...
  • Page 71 Reset Button button: 1. Turn off the AXIS 700. 2. Press and hold the Reset button while you switch on the AXIS 700. Keep the Reset button pressed until the Status, Busy and Network indicators flash at regular two second intervals.

  • Page 72: Front Panel Indicator Conditions

    The AXIS 700 will now restart with the factory default settings. Front Panel Indicator Conditions The Power LED is hardware controlled and should always remain on when power is connected to the AXIS 700. The remaining LEDs are all software controlled. Normal Conditions...
  • Page 73 Appendix A: Troubleshooting AXIS 700 User’s Manual This table lists a summary of error conditions: Error Conditions Status Busy Network Event Remarks Check SCSI cable to scanning Power up device Check RJ45 cable to network Check RJ45 cable to network. If...

  • Page 74: Error And Warning Messages

    Contact your scanner supplier. An error has occurred in the communication between the Scanner not ready, scanner and the AXIS 700. For example the copier might please check scanner have been taken out of scan mode and does not respond and restart the scan to any commands.
  • Page 75 Appendix A: Troubleshooting AXIS 700 User’s Manual Message Description Unresolved name: Cannot find the IP address mapped to <server name>. <server name> Not available: Cannot establish communication with the server specified <server address> in <server address>. Please try again later.
  • Page 76 AXIS 700 User’s Manual Appendix A: Troubleshooting Message Description The search base specified for LDAP is The search base specified for LDAP is invalid. invalid Illegal LDAP filter The LDAP filter specified is illegal. specified. User and password is User and password is required to connect this LDAP required to connect this server.

  • Page 77: Displaying The Log File

    Follow these steps to display the log file from a Web browser: Web Browser 1. Start the Web browser. 2. Enter the name or IP address of the AXIS 700 in the location/address field and press Enter: Example http://172.19.2.254 3.

  • Page 78: Appendix Bldap

    AXIS 700 User’s Manual Appendix B: LDAP Appendix B LDAP This section gives you an introduction to LDAP and how to use it. Introduction LDAP (Lightweight Directory Access Protocol) is used to program directory-enabled applications. It is a directory service that allows people to locate other users, resources, services and information.

  • Page 79: Usual Attribute Types

    Appendix B: LDAP AXIS 700 User’s Manual Usual attribute types These are the most typical attribute types (the LDAP server implementation should understand these attribute types): Attribute Type Matches objectClass Describes the kind of object which the entry represents. Contains the name of an object.
  • Page 80 AXIS 700 User’s Manual Appendix B: LDAP The attribute types are used to create search filters. There are six types of basic search filters and the syntax of the filters is in the <attribute><operator><value> format. Complex search filters can easily be constructed by combining these basic search filters and other complex filters using the Boolean operations AND, OR and NOT.
  • Page 81 Appendix B: LDAP AXIS 700 User’s Manual Using the Boolean operators and a prefix notation, the basic filters can be combined to form more complex ones. The ‘&’ character represents AND, the ‘|’ character represents OR and the ‘!’ character represents NOT.

  • Page 82: Example Searches

    AXIS 700 User’s Manual Appendix B: LDAP o The way you construct your filter will have a large impact on how fast the search is conducted. If you create a filter involving structures that the directory server can not evaluate efficiently, performance is likely to suffer.
  • Page 83 Appendix B: LDAP AXIS 700 User’s Manual...

  • Page 84: Appendix C The Parameter List

    AXIS 700 User’s Manual Appendix C: The Parameter List Appendix C The Parameter List This table shows the AXIS 700 parameter list. The middle column shows the default values, when applicable. The right-hand column gives a brief description of the parameter.
  • Page 85 DHCPEnable = yes Enables DHCP for setting the IP address. Specifies the name of the domain to which the AXIS 700 DomainName belongs. Domain refers to a set of computers on a network that have been assigned a group name. A domain might contain two or more workgroups.
  • Page 86 If not set for a destination, this setting will be used. Valid values are Nothing, Basic or Complete. Basic includes information about the AXIS 700, the connected scanning device, the parameter settings used when scanning etc. Complete also includes the image-related profile settings.
  • Page 87 Specifies the name or IP address of the SMTP mail Primary Mail Server server that provides the e-mail facilities for the AXIS 700. If you are using DNS, specify the name. Otherwise, specify the IP address. E.g. mail or mail.domain.com or 192.36.253.80.
  • Page 88 Destination0 [ Destination name ] Specifies the name of the file destination. This is the Description name that will appear in the destination list on the AXIS 700 message display. Specifies how the scanned image should be sent. Transfer method Specifies the e-mail address of the e-mail recipient.
  • Page 89 Appendix C: The Parameter List AXIS 700 User’s Manual Parameter name Value Description [Paper sizes] Specifies the number of paper sizes defined in the AXIS PaperSizes = 12 700. PaperSize0 = PaperSize-A3 Note that the parameters in this list applies to all paper [PaperSize-A3] sizes parameters.

  • Page 90: Appendix D Updating The Software

    Appendix D: Updating the Software Appendix D Updating the Software The AXIS 700 software stored in Flash memory can easily be updated over the network using FTP. All software updates are free of charge. Instructions on how to carry out the update are supplied with the software update.

  • Page 91: Updating The Flash Memory

    AXIS 700 User’s Manual Updating the Flash Memory To upgrade over the network you will need the following: • The file with the new AXIS 700 software. The name of the file is of the form , i.e. product-version.bin 700_1_14.bin software release 1.14 of the AXIS 700.
  • Page 92 AXIS 700 User’s Manual Appendix D: Updating the Software o You can also update the Flash memory using the flash loading port. For more information on this option, please contact your local dealer or distributor.
  • Page 93 Appendix D: Updating the Software AXIS 700 User’s Manual...

  • Page 94: Appendix E Technical Specifications

    HTTP 1.0+ and HTML 3.0+ compatible Web browsers HTTP, FTP, SMTP, TCP, IP, ARP, RARP, BOOTP, DHCP, Supported Protocols ICMP, SNMP, LDAP and NTP. The AXIS 700 automatically senses the brand and model of the Supported Scanning Devices attached scanning device, if supported. No user intervention is needed.
  • Page 95 Appendix E: Technical specifications AXIS 700 User’s Manual For the most recent list of supported scanners and copiers, check the AXIS 700 web site http://www.axis.com/products/axis_700/ or contact your local dealer. • Microsoft Exchange 5.0 Supported LDAP Server Software • Lotus cc: Mail 8.2 •...
  • Page 96 EEPROM memory. If using LDAP or server-based address lists, the number of destinations is limited to the available RAM. Flash memory allows central and remote updating of the AXIS 700 Software Updates software over the network using FTP.
  • Page 97 Appendix E: Technical specifications AXIS 700 User’s Manual...

  • Page 98: Appendix F Glossary

    AXIS 700 User’s Manual Appendix F: Glossary Appendix F Glossary Automatic Document Feeder. Advanced Interactive eXecutive. A version of the UNIX operating system from IBM that runs on various IBM computers including Mainframe systems. Address Resolution Protocol. A protocol within TCP/IP networks that allows a host to find the physical address of a node on the same network.
  • Page 99 Appendix F: Glossary AXIS 700 User’s Manual File Transfer Protocol. The TCP/IP protocol used for transferring files between computers on a network. HTML Hypertext Markup Language. A standard hypertext language used to create web pages and other hypertext documents. HTTP Hypertext Transfer Protocol.
  • Page 100 AXIS 700 User’s Manual Appendix F: Glossary Optical Character Recognition. A technology that converts scanned documents into editable and searchable text. Portable Document Format. A format for cross-platform distribution of electronic documents. Can be viewed by anyone that has Acrobat Reader from Adobe installed.
  • Page 101 Appendix F: Glossary AXIS 700 User’s Manual...

  • Page 102: Index

    AXIS 700 User’s Manual Index Index address book 33 Default 34 Administration tools 30 Default Router 34 Advanced menu 19 default router address 18 AIX systems 24 default settings 69 archiving 66 destination settings 40 destinations 54 OS/2 24 DHCP 22...
  • Page 103 Index AXIS 700 User’s Manual grayscale 48 OCR 66 HTTP 35 Paper orientation 58 paper sizes 50 PDF 66 image editing 66 photo 48 image formats 48 picture editing 66 image viewers 66 Power indicator 14 indicators 13 predefined paper sizes 50...
  • Page 104 AXIS 700 User’s Manual Index Server log 76 Web (HTTP) 35 Server Password 47 wizard 32 Server password 30 setting IP address ARP 23 BOOTP 26 control panel 17 DHCP 22 RARP 25 setting up destinations 40 setting up paper sizes 50...

Table of Contents