Axis 7000 User Manual page 74

74
Configuring the AXIS 7000/FX
3. Type
get config.ini
current directory.
4. Edit the file using your preferred text editor. In Windows 95 and
Windows NT environments, you can for example use Notepad.
Note:
Do not use MS Word or other similar word processor.
5. Type
put config.ini
and save it permanently.
6. To exit FTP, type the command
Notes:
• The configuration file can be used as a template when configuring
multiple document servers.
• It is sufficient to download the configuration parameters that have
changed. The other parameter settings will remain unchanged.
• All parameter settings apart from the IP address, Gateway and Subnet
mask can be changed using FTP. Please refer to "The Parameter List"
on page 111.
AXIS 7000/FX User's Manual
to download the configuration file to your
to download the file to the AXIS 7000/FX
, , or
quit bye
.
exit