Editing The Configuration Parameters - Axis StorPoint NAS 100 User Manual

StorPoint NAS 100 User's Manual

Editing the Configuration Parameters

Web Browser
Note:
FTP
If your network supports TCP/IP, you can display and edit the
StorPoint NAS parameter list using a standard Web browser:
• Netscape Navigator version 4.0 or higher, or
• Internet Explorer version 4.0 or higher
❏ You must first assign a valid IP address as described in "Assigning an
IP Address" on page 13.
To access the StorPoint NAS Home Page from your Web browser, you
simply enter the URL of the StorPoint NAS, i.e. the name or IP address,
in the location/address field.
Example:
http://192.16.253.80
You can retrieve the configuration parameters of your StorPoint NAS
using the File Transfer Protocol (FTP). FTP is supported by most
operating environments.
Follow these instructions:
1. Log in to the StorPoint NAS with the command:
ftp <IP address>
where
<IP address>
NAS.
2. You will be prompted for user id and password. Use the user id
which has the default password
3. Windows 95 only: Change directory not to overwrite any of your
system files. See the caution note below.
4. To access the configuration file, type:
get config.ini
Appendix A: Parameter List
is the name or IP address of your StorPoint
pass.
81
,
root