38
Configuring the AXIS 7000/FX
User Options
International
Authentication
The Allow Users to: field defines the privileges allowed to normal users
by the Administrator(s). Check the corresponding checkbox for each task a
user is allowed to perform, namely:
•
Add temporary e-mail destinations
•
Add temporary profiles
•
Scan documents to Web browser
•
Specify the sender of scanned documents
•
Configure network settings on the control panel
Notes:
• All tasks, except specifying the sender are enabled by default.
• Configuring the network settings on the control panel allows the user
to change the IP Address using the control panel.
Allows the Administrator(s) to select:
• The preferred language for messages displayed on the AXIS
7000/FX control panel display - English, French, German,
Spanish, Italian and Swedish are supported
• The keyboard layout which is compatible with the external
keyboard
• The measurement unit to be used for displaying defined paper
sizes (centimeters or inches).
Notes:
• The language default is set to English and the measurements to centi-
meters.
• When a new language is selected you must go back to the Profiles
page and click Restore Predefined Profiles to change the language in
the Profile Name list. This also applies to the language in the Paper
Sizes list, i.e. you must go back to the Paper Sizes page and click
Restore Predefined Paper Sizes.
Note: All user-defined profiles and modifications to predefined profiles
will be lost when you click Restore Predefined Profiles.
Authentication makes it possible to allow access to the AXIS 7000/FX to
authenticated users only. For more information, please refer to "Specifying
Authentication Settings" on page 52.
AXIS 7000/FX User's Manual