Axis 7000 User Manual page 83

AXIS 7000/FX User's Manual
Using a standard PC
Keyboard
Connecting a standard keyboard to your AXIS 7000/FX will allow you
to quickly search any destination within the resident list. You can do
this by simply typing in the first couple of characters of the destination
you wish to search for. The AXIS 7000/FX message display will
automatically show the destination that best matches the keyboard
input.
Note:
If the searched destination does not exist within the resident list the
Add Address: prompt will be displayed as shown below.
Follow the instructions below to add a new e-mail address to the list:
1. If the keyboard is not already connected, disconnect the AXIS
7000 power supply, connect the keyboard to the keyboard
connector located on the rear panel, and then reconnect the power
supply.
2. Press the Insert key on your keyboard. The following prompt will
appear on the message display:
Add address:
3. Enter the new e-mail address you want to add, then press Enter.
Note:
Only the five most-recently added temporary destinations will appear in
the destination list. Contact your Network Administrator if you want to
add a destination permanently.
Using the AXIS 7000/FX
83