Axis 7000 User Manual page 117

AXIS 7000/FX User's Manual
Parameter name
Description
Transfer method
Destination
[Destination-printer]
Description
Transfer method
Destination
Information level
Server
Resolutions
Paper sizes
Duplex supported
Duplex selection
LPD Mode
[Destination-FTP]
Description
Transfer method
Server
Value
=name(URL)
=Scan-to-URL (SMTP &
FTP)
=name@company.com
=printer
=Scan-to-print (LPD)
Scan-to-print (TCP)
=Printer Queue
= Nothing, Basic or Complete Specifies the amount of image information to be
=IP address or DNS name
=75, 100, 150, 200, 300, 600,
1200
=Executive, Letter, Legal,
Ledger, A4, A3
=yes/no
=SingleSided, DoubleSided,
AsScanned
=SingleDataFile,
SplitSourceFile,
BufferDataFiles,
MultipleDataFiles
=Scan-FTP
=Scan-to-file (FTP)
=IP address
The Parameter List
Description
Specifies the name of the file destination. This is
the name that will appear in the destination list
on the AXIS 7000/FX message display.
Specifies how the scanned image should be sent;
that is by which protocol.
Defines the E-mail address of the e-mail
recipient (SMTP).
Specifies the name of the printer. This is the
name that will appear in the destination list on
the AXIS 7000/FX message display.
Specifies how the scanned image should be sent;
that is by which protocol.
Defines the print queue for scan to print (LPD).
included with the image. Prints Date, time
information to the destination printer if the value
is set to something other than None. See also
[Clients] InformationLevel.
Dependent on the destination type, specifies the
IP address of the FTP server on which the
scanned image will be stored, or the printer
destination.
Specifies the resolution settings supported by the
destination printer.
Specifies the different paper sizes supported by the
destination printer.
Defines if the printer destination has duplex support;
that is, capable of printing on both sides of the paper.
Defines the printing format for the printer destination.
Specifies the LPD mode for the printer destination
Specifies the name of the FTP server. This is the
name that will appear in the destination list on
the AXIS 7000/FX message display.
Specifies how the scanned image should be sent;
that is by which protocol.
Specify the name or IP address of the FTP server
on which the scanned image will be stored.
117