Adding Temporary Profiles - Axis 7000 User Manual

86
Using the AXIS 7000/FX

Adding Temporary Profiles

If you have tried all the available profiles but are still not satisfied with
the result of your scanned image, you can add a temporary profile
from the Web browser interface.
1. Start the Web browser.
Note:
The Administrator might not allow the user to add temporary profiles.
2. Enter the name or IP address of your AXIS 7000/FX on the
location/address line.
Example:
http://172.16.253.80
3. This brings you to the AXIS 7000/FX Home Page. Click Profiles.
4. The table lists the available profiles. Click New Profile and specify
your settings. If you place a document in the scanning device, you
can click Scan to monitor the results.
Note:
The Administrator can disable the option for users to add temporary
profiles in which case the New Profile button will not appear.
5. Click Add to save the profile temporarily. Contact your Network
Administrator to make a profile permanent.
Notes:
• Only the five most recently added temporary profiles will appear in
the profile list. Contact your Administrator if you want to add a pro-
file permanently.
• All temporary profiles will be erased when the AXIS 7000/FX is shut
down or re-started.
AXIS 7000/FX User's Manual