Axis 7000 User Manual page 63

AXIS 7000/FX User's Manual
4. Enter a descriptive Destination Name for the printer.
5. Check the LPD radio button.
6. Type the IP Address or Host Name of the LPD server in the Server
field.
7. In the Print Queue field, type the name of the target printer queue
on the server. Optionally, enter a username to identify ownership of
the print job.
8. Define the LPD Mode by clicking one of the adjacent radio buttons,
namely, Axis Compatible Print Server, Windows Queue, Unix
Queue or Other.
Notes:
• Click Other if your destination printer server is not Axis-compatible.
• Click the Unix Queue button only if you wish to distribute the file to a
dedicated LPD server on your network.
9. From the drop-down Profile list, select the profile to be used as the
default for this destination.
Note:
The user can specify another profile from the AXIS 7000/FX control panel
at the moment of scanning. <Default-xx> is the default value specified
on the Destination Defaults page.
10. Check the Include Page Header checkbox only if you want date,
time, destination, Sent By and Page Number to appear on your
printer output.
11. If the target printer supports double sided printing, check the My
printer supports double sided printing checkbox and define your
printing preferences by clicking the associated radio buttons,
namely, Only Print Single Sided, Only Print Double Sided or Print
As Scanned.
12. Define the supported resolutions and paper sizes for the target printer
by checking the appropriate check boxes.
13. To complete this task do one of the following:
• If you have added a new Printer Destination, click Add to List.
After adding all of your required printers, click Done.
• If you have edited or copied an existing destination, click OK.
Configuring the AXIS 7000/FX
63