Axis 7000 User Manual page 101

AXIS 7000/FX User's Manual
Message
Paper jam
No paper in scanning
device
Scanner warming up, please
retry
Scanner not ready, please
check scanner and retry
The ADF cover is open,
please check and retry
Could not connect to LDAP
server
The user specified for LDAP
is invalid
Invalid LDAP credentials
(e.g. invalid user or
password)
Illegal LDAP filter specified
User and password are
required to connect to this
LDAP server
User and password can not
be used to connect to this
LDAP server
No destinations were
retrieved
LDAP error! No/several e-
mail address(es) were
retrieved
Missing mandatory FTP
parameter for external
address book
Scanner not
connected
Scanner not
supported
Scanning failed
Description
Paper jam in the scanning device. Remove paper to
continue sending.
No paper in the sheet feeder. Applies to scanners and
digital copiers without a flatbed.
The scanning device lamp must reach the correct tem-
perature and intensity.
The scanning device is busy. Please try again. If the er-
ror occurs repeatedly, contact your equipment suppli-
er.
Check that the ADF cover is properly closed and try
again.
The DNS name or the IP address may be wrong. The
server may be unreachable.
Invalid user name for the LDAP server. Enter a correct
user name.
The LDAP server did not recognize the user with the
specified password.
Invalid LDAP filter. Please enter a new value.
Please enter your username and password.
This LDAP server does not accept requests with the
specified username and password.
No destinations were retrieved. Change your LDAP set-
tings and try again.
The user could not be authenticated by the LDAP serv-
er. Change the LDAP settings and try again.
Check the FTP settings for the external address book
and try again.
Please check the scanning device connection and try
again.
The attached scanning device is not supported. Digital
copying/scanning will not work properly.
An error occurred whilst sending. Please refer to earlier
messages.
Troubleshooting
101