Axis 7000 User Manual page 49

49
AXIS 7000/FX User's Manual Configuring the AXIS 7000/FX
External Address Book via LDAP (e-mail destinations only) - Select
•
this option to retrieve an external address book from an LDAP
(Lightweight Directory Access Protocol) server. For more information on
LDAP, see "LDAP" on page 105. Check the AXIS 7000/FX Support Web
for more information on the settings for your specific LDAP server.
LDAP Server - Specify the name or IP Address of the LDAP server.
Port Number - Specify the number of the TCP/IP port.
User - Specify the name for logging on to the LDAP server, e.g.
cn=name, o=companyname, c=countrycode. If left blank, no
authorization will be attempted. If the contents in this field does not
include a "=" or a comma, the string "cn=" is automatically added to the
beginning of the contents.
Password - Specify the password for logging on to the LDAP server. If
the User field is left blank, this setting will be ignored.
Confirm - Confirm the password to make sure it was spelled correctly.
Name Field - Specify the name of the field that contains the
destination name.
E-mail Field - Specify the name of the field that contains the e-mail
address.
Search Base - Specify where to begin the search, e.g. o=companyname,
c=countrycode.
Filter - Specify an LDAP filter in order to reduce the length of the
destination list. The filter can be a real LDAP filter, e.g. (givenName=*).
You can also specify a list of conditions, e.g.
mail=adm*,telephoneNumber=+1 800*. In this case, the AXIS 7000/FX
will generate a real LDAP filter.